KSh250.00 + VAT
MUS156 Spare En54-11 Glass Pack For Mcp
SKU: MUS15610 Spare breakable glass pack for Morley-IAS addressable manual call points.
KSh610.53 + VAT
M200E-SMB Morley Surface Mounting Box
SKU: M200E-SMBSurface mounting box for M7xx series modules.
KSh2,035.09 + VAT
RA100Z System Sensor Remote Annunciator
SKU: RA100ZRA100Z remote annunciator is designed for both conventional and intelligent applications.
KSh3,052.63 + VAT
System Sensor Metal SaMPling Tube, 8 Ft. To 12 Ft. Width
SKU: DST10Duct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options.
KSh3,157.89 + VAT
MI-DISO Morley IAS Loop Isolation Module
SKU: MI-DISOKey Features:
- DIN rail mounting option
- Surface mounting option
- Plug in connectors
- Tri-colour LED status indication
- Address selector switches visible in 2 planes
- LED status visible in 2 planes
- Approved to GEA GEI 1-082 and CEA GEI 1-084
KSh4,833.33 + VAT
MI-DMMI Morley Interface – Single Input Monitor Module
SKU: MI-DMMI- Manufacturer : Morley by Honeywell
- Part Number : MI-DMMI
- Single Input Interface Module
- Requires M200E-SMB For Surface Mounting
KSh5,596.49 + VAT
MI-DMM21 Morley 2-Input Monitor Module
SKU: MI-DMM21Fire detection and fire alarm systems installed in and around buildings
KSh8,140.35 + VAT
BEAMMMK System Sensor Mounting Kit
SKU: BEAMMMK- The BEAMMMK allows reflected beam detectors and reflectors to be mounted to either a vertical wall or the ceiling. The kit allows for additional alignment range in cases where the detector and reflector cannot be mounted within 10 degree of each other. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector. (To mount the transmitter/ receiver the surface mount kit, BEAMSMK, must also be used). If the transmitter/receiver and the reflector require additional alignment range two kits are required.
KSh8,649.12 + VAT
MI-D240CM0 Morley Single 240 V Ac Relay Module
SKU: MI-D240CM0The MI/D240CMO addressable output module provides a single double pole contact output for 240 V AC (nominal 220 V AC) to switches the power to external equipment. The MI/D240CMO has built-in lop short circuit isolator and surface box for wall mount.
KSh10,175.44 + VAT
MI-DCZRM Morley Non-Addressable Zone Monitor Module
SKU: MI-DCZRM- Connection of a zone of non-addressable detectors to an analogue addressable fire system
- Built in isolation allowing system installation in stages without loss of protection
- Monitors open circuit and short circuit faults
- TRI-Colour Status LED
- Zone powered from addressable loop wiring or external 24V PSU
- Remote reset of non-addressable zone
- Monitoring of external power supply
- External fault input
- CPD approval to EN54-17 and EN54-18, LPCB and VdS
- DIN rail mountable, consistent with all other modules
- Support for an extended power supply range as low as 18Vdc 60mA with an External PSU
KSh18,315.79 + VAT
795-072-100 Morley Loop Driver Card For Morley IAS Protocol
SKU: 795-072-100-
Morley IAS Protocol Loop driver card for 460mA for ZX addressable fire alarm control panels.
KSh20,350.88 + VAT
FP200 Prysmian FIRe Resistant Cable
SKU: FP200-
FP200 Gold is a ‘standard’ fire resistant cable as defined by fire alarm and emergency lighting British Standards and the original alternative to mineral insulated cable. It is a tough, durable and dressable essential systems cable – easy to install and terminate.
KSh23,403.51 + VAT
795-111 Morley Two Loop Module For Extension For DXC2
SKU: 795-111Expansion module with 2 analog loops with capacity for 99 sensors plus 99 modules per loop (396 identifiable points).
KSh34,087.72 + VAT
795-077-060 Morley ZX 60 Zone Led Card
SKU: 795-077-06060 zone led card for use with the Morley ZX range of intelligent fire alarm control panel
KSh45,789.47 + VAT
BEAMLRK System Sensor Long Range Kit
SKU: BEAMLRKThe BEAMLRK allows reflected beam detectors to be installed at separations between 230 and 328 feet (70 to 100 meters).
MUS156 Spare En54-11 Glass Pack For Mcp
10 Spare breakable glass pack for Morley-IAS addressable manual call points.
RA100Z System Sensor Remote Annunciator
RA100Z remote annunciator is designed for both conventional and intelligent applications.
System Sensor Metal SaMPling Tube, 8 Ft. To 12 Ft. Width
Duct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options.
MI-DISO Morley IAS Loop Isolation Module
Key Features:
- DIN rail mounting option
- Surface mounting option
- Plug in connectors
- Tri-colour LED status indication
- Address selector switches visible in 2 planes
- LED status visible in 2 planes
- Approved to GEA GEI 1-082 and CEA GEI 1-084
MI-DMMI Morley Interface – Single Input Monitor Module
- Manufacturer : Morley by Honeywell
- Part Number : MI-DMMI
- Single Input Interface Module
- Requires M200E-SMB For Surface Mounting
MI-DMM21 Morley 2-Input Monitor Module
Fire detection and fire alarm systems installed in and around buildings
BEAMMMK System Sensor Mounting Kit
- The BEAMMMK allows reflected beam detectors and reflectors to be mounted to either a vertical wall or the ceiling. The kit allows for additional alignment range in cases where the detector and reflector cannot be mounted within 10 degree of each other. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector. (To mount the transmitter/ receiver the surface mount kit, BEAMSMK, must also be used). If the transmitter/receiver and the reflector require additional alignment range two kits are required.
MI-D240CM0 Morley Single 240 V Ac Relay Module
The MI/D240CMO addressable output module provides a single double pole contact output for 240 V AC (nominal 220 V AC) to switches the power to external equipment. The MI/D240CMO has built-in lop short circuit isolator and surface box for wall mount.
MI-DCZRM Morley Non-Addressable Zone Monitor Module
- Connection of a zone of non-addressable detectors to an analogue addressable fire system
- Built in isolation allowing system installation in stages without loss of protection
- Monitors open circuit and short circuit faults
- TRI-Colour Status LED
- Zone powered from addressable loop wiring or external 24V PSU
- Remote reset of non-addressable zone
- Monitoring of external power supply
- External fault input
- CPD approval to EN54-17 and EN54-18, LPCB and VdS
- DIN rail mountable, consistent with all other modules
- Support for an extended power supply range as low as 18Vdc 60mA with an External PSU
795-072-100 Morley Loop Driver Card For Morley IAS Protocol
-
Morley IAS Protocol Loop driver card for 460mA for ZX addressable fire alarm control panels.
FP200 Prysmian FIRe Resistant Cable
-
FP200 Gold is a ‘standard’ fire resistant cable as defined by fire alarm and emergency lighting British Standards and the original alternative to mineral insulated cable. It is a tough, durable and dressable essential systems cable – easy to install and terminate.
795-111 Morley Two Loop Module For Extension For DXC2
Expansion module with 2 analog loops with capacity for 99 sensors plus 99 modules per loop (396 identifiable points).
795-077-060 Morley ZX 60 Zone Led Card
60 zone led card for use with the Morley ZX range of intelligent fire alarm control panel
BEAMLRK System Sensor Long Range Kit
The BEAMLRK allows reflected beam detectors to be installed at separations between 230 and 328 feet (70 to 100 meters).
MUS156 Spare En54-11 Glass Pack For Mcp
10 Spare breakable glass pack for Morley-IAS addressable manual call points.
RA100Z System Sensor Remote Annunciator
RA100Z remote annunciator is designed for both conventional and intelligent applications.
System Sensor Metal SaMPling Tube, 8 Ft. To 12 Ft. Width
Duct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options.
MI-DISO Morley IAS Loop Isolation Module
Key Features:
- DIN rail mounting option
- Surface mounting option
- Plug in connectors
- Tri-colour LED status indication
- Address selector switches visible in 2 planes
- LED status visible in 2 planes
- Approved to GEA GEI 1-082 and CEA GEI 1-084
MI-DMMI Morley Interface – Single Input Monitor Module
- Manufacturer : Morley by Honeywell
- Part Number : MI-DMMI
- Single Input Interface Module
- Requires M200E-SMB For Surface Mounting
MI-DMM21 Morley 2-Input Monitor Module
Fire detection and fire alarm systems installed in and around buildings
BEAMMMK System Sensor Mounting Kit
- The BEAMMMK allows reflected beam detectors and reflectors to be mounted to either a vertical wall or the ceiling. The kit allows for additional alignment range in cases where the detector and reflector cannot be mounted within 10 degree of each other. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector. (To mount the transmitter/ receiver the surface mount kit, BEAMSMK, must also be used). If the transmitter/receiver and the reflector require additional alignment range two kits are required.
MI-D240CM0 Morley Single 240 V Ac Relay Module
The MI/D240CMO addressable output module provides a single double pole contact output for 240 V AC (nominal 220 V AC) to switches the power to external equipment. The MI/D240CMO has built-in lop short circuit isolator and surface box for wall mount.
MI-DCZRM Morley Non-Addressable Zone Monitor Module
- Connection of a zone of non-addressable detectors to an analogue addressable fire system
- Built in isolation allowing system installation in stages without loss of protection
- Monitors open circuit and short circuit faults
- TRI-Colour Status LED
- Zone powered from addressable loop wiring or external 24V PSU
- Remote reset of non-addressable zone
- Monitoring of external power supply
- External fault input
- CPD approval to EN54-17 and EN54-18, LPCB and VdS
- DIN rail mountable, consistent with all other modules
- Support for an extended power supply range as low as 18Vdc 60mA with an External PSU
795-072-100 Morley Loop Driver Card For Morley IAS Protocol
-
Morley IAS Protocol Loop driver card for 460mA for ZX addressable fire alarm control panels.
FP200 Prysmian FIRe Resistant Cable
-
FP200 Gold is a ‘standard’ fire resistant cable as defined by fire alarm and emergency lighting British Standards and the original alternative to mineral insulated cable. It is a tough, durable and dressable essential systems cable – easy to install and terminate.
795-111 Morley Two Loop Module For Extension For DXC2
Expansion module with 2 analog loops with capacity for 99 sensors plus 99 modules per loop (396 identifiable points).
795-077-060 Morley ZX 60 Zone Led Card
60 zone led card for use with the Morley ZX range of intelligent fire alarm control panel
BEAMLRK System Sensor Long Range Kit
The BEAMLRK allows reflected beam detectors to be installed at separations between 230 and 328 feet (70 to 100 meters).
MUS156 Spare En54-11 Glass Pack For Mcp
10 Spare breakable glass pack for Morley-IAS addressable manual call points.
RA100Z System Sensor Remote Annunciator
RA100Z remote annunciator is designed for both conventional and intelligent applications.
System Sensor Metal SaMPling Tube, 8 Ft. To 12 Ft. Width
Duct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options.
MI-DISO Morley IAS Loop Isolation Module
Key Features:
- DIN rail mounting option
- Surface mounting option
- Plug in connectors
- Tri-colour LED status indication
- Address selector switches visible in 2 planes
- LED status visible in 2 planes
- Approved to GEA GEI 1-082 and CEA GEI 1-084
MI-DMMI Morley Interface – Single Input Monitor Module
- Manufacturer : Morley by Honeywell
- Part Number : MI-DMMI
- Single Input Interface Module
- Requires M200E-SMB For Surface Mounting
MI-DMM21 Morley 2-Input Monitor Module
Fire detection and fire alarm systems installed in and around buildings
BEAMMMK System Sensor Mounting Kit
- The BEAMMMK allows reflected beam detectors and reflectors to be mounted to either a vertical wall or the ceiling. The kit allows for additional alignment range in cases where the detector and reflector cannot be mounted within 10 degree of each other. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector. (To mount the transmitter/ receiver the surface mount kit, BEAMSMK, must also be used). If the transmitter/receiver and the reflector require additional alignment range two kits are required.
MI-D240CM0 Morley Single 240 V Ac Relay Module
The MI/D240CMO addressable output module provides a single double pole contact output for 240 V AC (nominal 220 V AC) to switches the power to external equipment. The MI/D240CMO has built-in lop short circuit isolator and surface box for wall mount.
MI-DCZRM Morley Non-Addressable Zone Monitor Module
- Connection of a zone of non-addressable detectors to an analogue addressable fire system
- Built in isolation allowing system installation in stages without loss of protection
- Monitors open circuit and short circuit faults
- TRI-Colour Status LED
- Zone powered from addressable loop wiring or external 24V PSU
- Remote reset of non-addressable zone
- Monitoring of external power supply
- External fault input
- CPD approval to EN54-17 and EN54-18, LPCB and VdS
- DIN rail mountable, consistent with all other modules
- Support for an extended power supply range as low as 18Vdc 60mA with an External PSU
795-072-100 Morley Loop Driver Card For Morley IAS Protocol
-
Morley IAS Protocol Loop driver card for 460mA for ZX addressable fire alarm control panels.
FP200 Prysmian FIRe Resistant Cable
-
FP200 Gold is a ‘standard’ fire resistant cable as defined by fire alarm and emergency lighting British Standards and the original alternative to mineral insulated cable. It is a tough, durable and dressable essential systems cable – easy to install and terminate.
795-111 Morley Two Loop Module For Extension For DXC2
Expansion module with 2 analog loops with capacity for 99 sensors plus 99 modules per loop (396 identifiable points).
795-077-060 Morley ZX 60 Zone Led Card
60 zone led card for use with the Morley ZX range of intelligent fire alarm control panel
BEAMLRK System Sensor Long Range Kit
The BEAMLRK allows reflected beam detectors to be installed at separations between 230 and 328 feet (70 to 100 meters).