
WI-R2 WI-TEK WiFi Router
SKU: WI-R2-WITEK- 100mW Power Output + 4 * 5dbi High Gain Antennas, Wall penetration wifi design
- Wireless B / G / N Speed up to 300M, Support Router, AP, Repeater, WISP Mode
- WAN Port support PoE Out, PoE Voltage range from 9V-48V
- WAN / LAN1 / LAN2 PoE Input, Output optional
- Support PoE Pass-through + 2×2 MIMO Technology
- Support Remotely management by WAN Port
- Support QVLAN TAG binding with multi-SSID
- Passive PoE Supports up to 100 Meters
- 64MB SDRAM 8MB Flash, 600Mhz CPU

WI-LTE110-O WI-TEK 4G LTE Outdoor CPE
SKU: WI-LTE110-O-WITEK- 4G transform to Wi-Fi and wired network
- Build in 3G/4G SIM card slot, support LTE-TDD/LTE-FDD, WCDMA/CDMA and GSM networking. Then band adjustable, can comply with all operator in the world.
- High RF power design, with omni 2.4G/4G antenna, more wireless coverage, better signal strength and more stable performance.
- It support VPN(L2TP, PPTP, auto VPN), meet with industrial applications such as chain stores, ATM..
- Support Power over Ethernet, 24V passive PoE, can work in the place even no power supply, simple to install it.
- Support 50users+ for Wi-Fi access
- 10KV Lightning Protection

WI-CPE511-KIT WI-TEK 5.8GHz 300Mbps Outdoor Wireless Transmitter
SKU: WI-CPE511-KIT-WITEK- 200mW High power output, coverage up to 5km for PTP and PTMP wireless CCTV application
- 5.8G Wireless A/N speed up to 300Mbps
- 5km wireless transmit for Carry 5-10pcs 1080P camera
- Easy setup for PTP/PTMP application, no need setting software
- Support open frequency from 4920 to 6100 MHz
- Inside 60 degree16dBi Directional Antenna Technology
- 23dBm High-Power design
- 2×2 MIMO Technology
- Passive PoE Adapter supports up to 100 meter
- 1 *100Mbps Port design
- Qualcomm AR9342 600MHz Chipset,64MB RAM
- 10KV Lightning Protection

WI-PS110F WI-TEK POE Switch 8 Port 100Mbps
SKU: WI-PS110F-WITEK- 10 100Mbps Ports with 8 PoE,2 Giga Combo SFP
- Supports PoE power up to 30W for each port
- Supports PoE IEEE 802.3af/atcompliant PDs
- External power adapter supply 120W
- LED indicators for LINK/ACT,Power, PoE
- Status, 100/1000Mbps
- 2K entry MAC address table with auto
- learning and auto-aging

WI-CPE515-KIT WI-TEK 5.8GHz 300Mbps Outdoor Wireless Transmitter
SKU: WI-CPE515-KIT-WITEK- 500mW High power output, coverage up to 10km for PTP and PTMP wireless CCTV application
- 10km wireless transmit for Carry 5-15pcs 1080P camera
- auto-connect for PTP/PTMP application, no need setting software
- Wireless A/N speed up to 300Mbps
- Support open frequency from 4920 to 6100 MHz
- Inside 60 degree16dBi Directional Antenna Technology
- 27dBm High-Power design
- 2×2 MIMO Technology
- Passive PoE Adapter supports up to 100 meter
- Qualcomm AR9344 600MHz Chipset,64MB RAM
- 10KV Lightning Protection
- Super TDMA Technology

WI-PS308G 10-Port 48V Gigabit Ports PoE Switch with 8-Port PoE
SKU: WI-PS308GAdd to cartCompare
NSW2010-16T2GC-POE-IN 16PoE+2GC Switch
SKU: N/AMultiple working modes to address your business needs: Normal, Secure and Surveillance
Support port traffic control
Support for secure mode, all downlink ports can communicate only with uplink ports
Up to 250m transmission distance on surveillance mode
Support buffer optimization
All metal housing, safe and reliable

WI-PS128GF WI-TEK Fiber PoE Switch
SKU: WI-PS128GF-WITEK- 24FE+4 Gigabit Combo SFP 802.3af/at PoE Switch with 24 Port PoE
- Supports PoE power up to 30W for each port
- Supports PoE IEEE 802.3af/atcompliant PDs
- Internal power adapter supply 350W
- LED indicators for LINK/ACT,Power, PoE Status, 100/1000Mbps
- 8K entry MAC address table with auto-learning and auto-aging

WI-R2 WI-TEK WiFi Router
- 100mW Power Output + 4 * 5dbi High Gain Antennas, Wall penetration wifi design
- Wireless B / G / N Speed up to 300M, Support Router, AP, Repeater, WISP Mode
- WAN Port support PoE Out, PoE Voltage range from 9V-48V
- WAN / LAN1 / LAN2 PoE Input, Output optional
- Support PoE Pass-through + 2×2 MIMO Technology
- Support Remotely management by WAN Port
- Support QVLAN TAG binding with multi-SSID
- Passive PoE Supports up to 100 Meters
- 64MB SDRAM 8MB Flash, 600Mhz CPU

WI-LTE110-O WI-TEK 4G LTE Outdoor CPE
- 4G transform to Wi-Fi and wired network
- Build in 3G/4G SIM card slot, support LTE-TDD/LTE-FDD, WCDMA/CDMA and GSM networking. Then band adjustable, can comply with all operator in the world.
- High RF power design, with omni 2.4G/4G antenna, more wireless coverage, better signal strength and more stable performance.
- It support VPN(L2TP, PPTP, auto VPN), meet with industrial applications such as chain stores, ATM..
- Support Power over Ethernet, 24V passive PoE, can work in the place even no power supply, simple to install it.
- Support 50users+ for Wi-Fi access
- 10KV Lightning Protection

WI-CPE511-KIT WI-TEK 5.8GHz 300Mbps Outdoor Wireless Transmitter
- 200mW High power output, coverage up to 5km for PTP and PTMP wireless CCTV application
- 5.8G Wireless A/N speed up to 300Mbps
- 5km wireless transmit for Carry 5-10pcs 1080P camera
- Easy setup for PTP/PTMP application, no need setting software
- Support open frequency from 4920 to 6100 MHz
- Inside 60 degree16dBi Directional Antenna Technology
- 23dBm High-Power design
- 2×2 MIMO Technology
- Passive PoE Adapter supports up to 100 meter
- 1 *100Mbps Port design
- Qualcomm AR9342 600MHz Chipset,64MB RAM
- 10KV Lightning Protection

WI-PS110F WI-TEK POE Switch 8 Port 100Mbps
- 10 100Mbps Ports with 8 PoE,2 Giga Combo SFP
- Supports PoE power up to 30W for each port
- Supports PoE IEEE 802.3af/atcompliant PDs
- External power adapter supply 120W
- LED indicators for LINK/ACT,Power, PoE
- Status, 100/1000Mbps
- 2K entry MAC address table with auto
- learning and auto-aging

WI-CPE515-KIT WI-TEK 5.8GHz 300Mbps Outdoor Wireless Transmitter
- 500mW High power output, coverage up to 10km for PTP and PTMP wireless CCTV application
- 10km wireless transmit for Carry 5-15pcs 1080P camera
- auto-connect for PTP/PTMP application, no need setting software
- Wireless A/N speed up to 300Mbps
- Support open frequency from 4920 to 6100 MHz
- Inside 60 degree16dBi Directional Antenna Technology
- 27dBm High-Power design
- 2×2 MIMO Technology
- Passive PoE Adapter supports up to 100 meter
- Qualcomm AR9344 600MHz Chipset,64MB RAM
- 10KV Lightning Protection
- Super TDMA Technology


NSW2010-16T2GC-POE-IN 16PoE+2GC Switch
Multiple working modes to address your business needs: Normal, Secure and Surveillance
Support port traffic control
Support for secure mode, all downlink ports can communicate only with uplink ports
Up to 250m transmission distance on surveillance mode
Support buffer optimization
All metal housing, safe and reliable

WI-PS128GF WI-TEK Fiber PoE Switch
- 24FE+4 Gigabit Combo SFP 802.3af/at PoE Switch with 24 Port PoE
- Supports PoE power up to 30W for each port
- Supports PoE IEEE 802.3af/atcompliant PDs
- Internal power adapter supply 350W
- LED indicators for LINK/ACT,Power, PoE Status, 100/1000Mbps
- 8K entry MAC address table with auto-learning and auto-aging

WI-R2 WI-TEK WiFi Router
- 100mW Power Output + 4 * 5dbi High Gain Antennas, Wall penetration wifi design
- Wireless B / G / N Speed up to 300M, Support Router, AP, Repeater, WISP Mode
- WAN Port support PoE Out, PoE Voltage range from 9V-48V
- WAN / LAN1 / LAN2 PoE Input, Output optional
- Support PoE Pass-through + 2×2 MIMO Technology
- Support Remotely management by WAN Port
- Support QVLAN TAG binding with multi-SSID
- Passive PoE Supports up to 100 Meters
- 64MB SDRAM 8MB Flash, 600Mhz CPU

WI-LTE110-O WI-TEK 4G LTE Outdoor CPE
- 4G transform to Wi-Fi and wired network
- Build in 3G/4G SIM card slot, support LTE-TDD/LTE-FDD, WCDMA/CDMA and GSM networking. Then band adjustable, can comply with all operator in the world.
- High RF power design, with omni 2.4G/4G antenna, more wireless coverage, better signal strength and more stable performance.
- It support VPN(L2TP, PPTP, auto VPN), meet with industrial applications such as chain stores, ATM..
- Support Power over Ethernet, 24V passive PoE, can work in the place even no power supply, simple to install it.
- Support 50users+ for Wi-Fi access
- 10KV Lightning Protection

WI-CPE511-KIT WI-TEK 5.8GHz 300Mbps Outdoor Wireless Transmitter
- 200mW High power output, coverage up to 5km for PTP and PTMP wireless CCTV application
- 5.8G Wireless A/N speed up to 300Mbps
- 5km wireless transmit for Carry 5-10pcs 1080P camera
- Easy setup for PTP/PTMP application, no need setting software
- Support open frequency from 4920 to 6100 MHz
- Inside 60 degree16dBi Directional Antenna Technology
- 23dBm High-Power design
- 2×2 MIMO Technology
- Passive PoE Adapter supports up to 100 meter
- 1 *100Mbps Port design
- Qualcomm AR9342 600MHz Chipset,64MB RAM
- 10KV Lightning Protection

WI-PS110F WI-TEK POE Switch 8 Port 100Mbps
- 10 100Mbps Ports with 8 PoE,2 Giga Combo SFP
- Supports PoE power up to 30W for each port
- Supports PoE IEEE 802.3af/atcompliant PDs
- External power adapter supply 120W
- LED indicators for LINK/ACT,Power, PoE
- Status, 100/1000Mbps
- 2K entry MAC address table with auto
- learning and auto-aging

WI-CPE515-KIT WI-TEK 5.8GHz 300Mbps Outdoor Wireless Transmitter
- 500mW High power output, coverage up to 10km for PTP and PTMP wireless CCTV application
- 10km wireless transmit for Carry 5-15pcs 1080P camera
- auto-connect for PTP/PTMP application, no need setting software
- Wireless A/N speed up to 300Mbps
- Support open frequency from 4920 to 6100 MHz
- Inside 60 degree16dBi Directional Antenna Technology
- 27dBm High-Power design
- 2×2 MIMO Technology
- Passive PoE Adapter supports up to 100 meter
- Qualcomm AR9344 600MHz Chipset,64MB RAM
- 10KV Lightning Protection
- Super TDMA Technology

NSW2010-16T2GC-POE-IN 16PoE+2GC Switch
Multiple working modes to address your business needs: Normal, Secure and Surveillance
Support port traffic control
Support for secure mode, all downlink ports can communicate only with uplink ports
Up to 250m transmission distance on surveillance mode
Support buffer optimization
All metal housing, safe and reliable

WI-PS128GF WI-TEK Fiber PoE Switch
- 24FE+4 Gigabit Combo SFP 802.3af/at PoE Switch with 24 Port PoE
- Supports PoE power up to 30W for each port
- Supports PoE IEEE 802.3af/atcompliant PDs
- Internal power adapter supply 350W
- LED indicators for LINK/ACT,Power, PoE Status, 100/1000Mbps
- 8K entry MAC address table with auto-learning and auto-aging

WI-R2 WI-TEK WiFi Router
- 100mW Power Output + 4 * 5dbi High Gain Antennas, Wall penetration wifi design
- Wireless B / G / N Speed up to 300M, Support Router, AP, Repeater, WISP Mode
- WAN Port support PoE Out, PoE Voltage range from 9V-48V
- WAN / LAN1 / LAN2 PoE Input, Output optional
- Support PoE Pass-through + 2×2 MIMO Technology
- Support Remotely management by WAN Port
- Support QVLAN TAG binding with multi-SSID
- Passive PoE Supports up to 100 Meters
- 64MB SDRAM 8MB Flash, 600Mhz CPU

WI-LTE110-O WI-TEK 4G LTE Outdoor CPE
- 4G transform to Wi-Fi and wired network
- Build in 3G/4G SIM card slot, support LTE-TDD/LTE-FDD, WCDMA/CDMA and GSM networking. Then band adjustable, can comply with all operator in the world.
- High RF power design, with omni 2.4G/4G antenna, more wireless coverage, better signal strength and more stable performance.
- It support VPN(L2TP, PPTP, auto VPN), meet with industrial applications such as chain stores, ATM..
- Support Power over Ethernet, 24V passive PoE, can work in the place even no power supply, simple to install it.
- Support 50users+ for Wi-Fi access
- 10KV Lightning Protection

WI-CPE511-KIT WI-TEK 5.8GHz 300Mbps Outdoor Wireless Transmitter
- 200mW High power output, coverage up to 5km for PTP and PTMP wireless CCTV application
- 5.8G Wireless A/N speed up to 300Mbps
- 5km wireless transmit for Carry 5-10pcs 1080P camera
- Easy setup for PTP/PTMP application, no need setting software
- Support open frequency from 4920 to 6100 MHz
- Inside 60 degree16dBi Directional Antenna Technology
- 23dBm High-Power design
- 2×2 MIMO Technology
- Passive PoE Adapter supports up to 100 meter
- 1 *100Mbps Port design
- Qualcomm AR9342 600MHz Chipset,64MB RAM
- 10KV Lightning Protection

WI-PS110F WI-TEK POE Switch 8 Port 100Mbps
- 10 100Mbps Ports with 8 PoE,2 Giga Combo SFP
- Supports PoE power up to 30W for each port
- Supports PoE IEEE 802.3af/atcompliant PDs
- External power adapter supply 120W
- LED indicators for LINK/ACT,Power, PoE
- Status, 100/1000Mbps
- 2K entry MAC address table with auto
- learning and auto-aging

WI-CPE515-KIT WI-TEK 5.8GHz 300Mbps Outdoor Wireless Transmitter
- 500mW High power output, coverage up to 10km for PTP and PTMP wireless CCTV application
- 10km wireless transmit for Carry 5-15pcs 1080P camera
- auto-connect for PTP/PTMP application, no need setting software
- Wireless A/N speed up to 300Mbps
- Support open frequency from 4920 to 6100 MHz
- Inside 60 degree16dBi Directional Antenna Technology
- 27dBm High-Power design
- 2×2 MIMO Technology
- Passive PoE Adapter supports up to 100 meter
- Qualcomm AR9344 600MHz Chipset,64MB RAM
- 10KV Lightning Protection
- Super TDMA Technology


NSW2010-16T2GC-POE-IN 16PoE+2GC Switch
Multiple working modes to address your business needs: Normal, Secure and Surveillance
Support port traffic control
Support for secure mode, all downlink ports can communicate only with uplink ports
Up to 250m transmission distance on surveillance mode
Support buffer optimization
All metal housing, safe and reliable

WI-PS128GF WI-TEK Fiber PoE Switch
- 24FE+4 Gigabit Combo SFP 802.3af/at PoE Switch with 24 Port PoE
- Supports PoE power up to 30W for each port
- Supports PoE IEEE 802.3af/atcompliant PDs
- Internal power adapter supply 350W
- LED indicators for LINK/ACT,Power, PoE Status, 100/1000Mbps
- 8K entry MAC address table with auto-learning and auto-aging