Fire
KAC MCP1A-Y470SG-14 Yellow Extinguishant Release Call Point
Ksh2,646.00- Manufacturer : KAC
- Part Number : MCP1A-Y470SG-14
- Yellow Extinguishant Release Call Point Unit
- Surface Mounted Version – Supplied With Backbox
- Supplied With Frangible Glass Element & Test / Reset Key
- 470Ohm Resistor & NO Contact
MCP1A-R470FG-01 Honeywell Conventional Flush Call Point Notifier
Ksh2,692.49Notifier MCP1A-R470FG-01 Conventional Flush Call Point with 470 Ohm Resistor
The MCP1A-R470 ranges are manual call points, both with a 470 Ohm resistor and Normally Open contact, complete with glass. The MCP1A-R470FG-01 is designed for semi flush mounting and the MCP1A-R470SG-01 is designed for surface mounting. The call points are designed to provide a manual alarm interface to non-addressable fire alarm control panels. MCP1A-R470FG-01 & MCP1A-R470SG-01 call points are supplied in the standard red colour.
ECO1002 System Sensor Conventional Multi-Sensor Detector – Smoke & Heat
Ksh3,168.00- Low profile design
- Low current draw
- Automatic drift compensation
- Operates on 12 and 24VDC Systems
- Remote alarm test feature
- Easy Maintenance
- Range of detector bases available
- Remote LED Option
- Approved to EN54 – 7:2000 (Amendment 1)
- EN54 – 5:2000 (Amendment 1) Class A1R; CEA 4021
MI-WSS-PR-N Morley Intelligent Wall Mounted Sounder Strobe
Ksh15,360.00
Features |
|
| Model : | WSS-PR-N05 |
| Type : | Intelligent Wall Mounted Sounder Strobe |
| Mounting Type : | Wall |
| Voltage : | 15 – 32V DC |
| Color : | Red |
WRR Morley Intelligent Loop Sounder Base
Ksh1,108.50Features
- Loop powered
- Low current draw enables more devices on loop
- Adjustable volume control on device
- Intense strobe output
- Faster installation
- Large cable access
- Rear or surface cable entry
- Loop continuity spring
- Automatic synchronisation of sounder and strobe
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
Ksh15,750.00Addressable call point for the Morley IAS protocol features Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new WCP Outdoor Call Point range.
SR1T Morley Call Point Backbox For Surface Mounting
Ksh712.50- Manufacturer : Morley by Honeywell
- Part Number : SR1T / PS031W
- Surface Mounted Call Point Backbox
RA100Z System Sensor Remote Annunciator
Ksh3,168.00RA100Z remote annunciator is designed for both conventional and intelligent applications.
PS200 KAC – Fire Alarm Call Point Cover
Ksh926.99The KAC call point cover part number PS200; will fit all types of KAC call points including the old flat type to the new curved type.
MUS156 Spare En54-11 Glass Pack For Mcp
Ksh390.0010 Spare breakable glass pack for Morley-IAS addressable manual call points.
MI-WSO-PR-N Morley IAS Wall Mounted Sounder – Addressable – Red
Ksh7,839.00- Manufacturer : Morley IAS by Honeywell
- Part Number : MI-WSO-PR-N
- Wall Mounted Addressable Sounder
- Colour : Red
- Requires B501AP Terminal Plate For Mounting
MI-PSE-S2-IV Morley Smoke Detector Optical Analogue Addressable
Ksh5,542.50- Manufacturer : Morley by Honeywell
- Part Number : MI-PSE-S2-IV
- Analogue Addressable Optical Smoke Detector
- Morley IAS Protocol
- Colour : Ivory
- Requires B501AP-IV Detector Base
MI-DMMI Morley Interface – Single Input Monitor Module
Ksh7,521.00- Manufacturer : Morley by Honeywell
- Part Number : MI-DMMI
- Single Input Interface Module
- Requires M200E-SMB For Surface Mounting
MI-DMM21 Morley 2-Input Monitor Module
Ksh8,709.00Fire detection and fire alarm systems installed in and around buildings
MI-DISO Morley IAS Loop Isolation Module
Ksh4,914.00Key Features:
- DIN rail mounting option
- Surface mounting option
- Plug in connectors
- Tri-colour LED status indication
- Address selector switches visible in 2 planes
- LED status visible in 2 planes
- Approved to GEA GEI 1-082 and CEA GEI 1-084
MI-DCZRM Morley Non-Addressable Zone Monitor Module
Ksh15,834.00- Connection of a zone of non-addressable detectors to an analogue addressable fire system
- Built in isolation allowing system installation in stages without loss of protection
- Monitors open circuit and short circuit faults
- TRI-Colour Status LED
- Zone powered from addressable loop wiring or external 24V PSU
- Remote reset of non-addressable zone
- Monitoring of external power supply
- External fault input
- CPD approval to EN54-17 and EN54-18, LPCB and VdS
- DIN rail mountable, consistent with all other modules
- Support for an extended power supply range as low as 18Vdc 60mA with an External PSU